High Pressure Antibacterial Steam Wash
Steam wash of the coil and blower to kill bacteria
| 1 unit | $60/unit |
| 2 units | $40/unit |
| 3 or more units | $35/unit |
Steam cleaning uses hot, high-pressure steam to reach deep into the coil fins and blower, where a brush cannot go. The heat loosens grime and kills the bacteria and mould that cause musty smells. It is a good choice when your aircon smells, someone at home has allergies, or the unit has not been cleaned properly in a long time.

Our High Pressure Antibacterial Steam Wash costs $60 for one unit, $40 per unit for two units and $35 per unit for three or more units. High Pressure Steam Cleaning costs $60 per unit for one to two units and $50 per unit for three or more units.
Steam wash of the coil and blower to kill bacteria
| 1 unit | $60/unit |
| 2 units | $40/unit |
| 3 or more units | $35/unit |
Deep steam clean for dusty, smelly units
| 1 to 2 units | $60/unit |
| 3 or more units | $50/unit |

Prices are for standard wall-mounted units. Let us know the brand and size when you book if you have a ceiling cassette or other unit type.
That smell comes from mould and bacteria growing on the wet coil and blower. Steam kills them at the source.
An antibacterial steam wash cleans the air path without leaving strong chemical residue behind.
Spots on the outlet usually mean mould on the blower wheel too. Steam reaches it without dismantling the unit.
If the unit still feels weak after a normal service, a steam clean removes the deeper build-up.
We wrap the unit in a protective cover that channels dirty water into a bucket.
Hot high-pressure steam goes through the coil fins to lift dust, grease and mould.
We steam the blower wheel and outlet, where most of the smell comes from.
We wipe everything dry, flush the drain and test the aircon with you.




They solve different problems. Steam cleaning is best for smells, bacteria and moderate dirt, and uses no harsh chemicals. A chemical wash is stronger for heavy build-up and poor cooling. If you are unsure, send us a photo of the unit on WhatsApp and we will suggest the right one.
No. We cover the electrical parts and control board before steaming, and the steam is aimed at the coil and blower only.
Most wall-mounted units take about 45 minutes to an hour each, including setting up the cover and testing at the end.
The High Pressure Antibacterial Steam Wash focuses on killing bacteria and mould in the coil and blower. High Pressure Steam Cleaning is a longer, deeper steam clean for dustier units. Both are priced per unit on this page.

Routine filter, coil and drain cleaning that keeps your aircon cold and your power bill down.
See prices and details →
Coil cleaner plus a steam flush for weak cooling and dripping units, done on the wall.
See prices and details →
The unit is taken down, dismantled and soaked to fix leaks, smells and very poor cooling.
See prices and details →Tell us the service and how many units. We will reply on WhatsApp with the price and the next available slot.